FAQs
- Which number plate protector should I buy for my plates? We have designed an easy process to help you find the most appropriate size for your plates. All you need to do is enter your state and the front/rear plate dimensions on this page Product categories Number Plate Protectors. You will then be given the most suitable Altrex protectors for your plate sizes.
- What is the purpose of the lines on the covers? This is purely aesthetic/ personal preference.
- Can I just buy a single number plate protector? Our products are usually sold in pairs. However, our team may be able to prepare a special order for you. Please email us at sales@altrex.com.au with your plate dimensions. You will also need to tell us your delivery address and whether you’d like a clear cover or lines.
- How do you attach the Altrex number plate protectors? Identify which type of fitting you have purchased and follow the instructions below. These are also included with the packaging. You can also check out the How to Channel Videos or visit our social accounts.
Before you fit your new Plate Protectors, clean your number plate thoroughly and cover any remaining holes with an adhesive tape to prevent dirt and moisture from coming through.
U-SHAPED CLIP
1- Hold protector against the number plate.
2- Position each clip behind the number plate and over the top of the protector.
3- Click top and bottom clips into place to ensure protector is securely held in position.
Alternative fitting when there is no room for putting the clips in place:
1- Loosen the number plate screws and place the 4 clips into position behind the number plate.
2- Retighten screws with the clips lined up to the recesses of the number plate protector.
3- Slide protector under top or bottom clips and click into place.
4- Carefully lever open the remaining 2 clips so they can be clicked into position to secure the ALTREX plate protector.
SWIVEL CLIP
1- Hold protector in place against the number plate.
2- Rotate top or bottom clips to open position.
3- Press top or bottom firmly against number plate and rotate clips to closed position, ensuring back of clip is placed behind the number plate and front of clip locks in place.
4- Repeat for each clip.
5- When completed, check that all clips are securely fitted.
6- If clips are loose or come out of the hole, simply push the clips back into the hole until you hear a click.
METAL BRACKET
1- If required, loosen the number plate screws enough to slide the enclosed brackets behind the number plate approximately 5cm from each end.
2- Retighten screws on number plate.
3- Open the end of the brackets with your fingers to allow the protector to be placed over the number plate.
4- Squeeze the brackets firmly closed to secure the ALTREX plate protector.
PLEASE NOTE
– On some vehicles, it may be necessary to space the number plate from the vehicle by using spacers or washers.
– Number plates must always be clean and visible.
– Damaged or distorted plates should always be replaced before fitting your ALTREX number plate protector.
- Can I buy replacement clips for my Altrex number plate protector? Yes! Replacement clips in a pack of 4 can be purchased online here Search Results clips
- Where can I buy replacement foam for my Altrex number plate cover? We will happily send you some foam! Just contact us at sales@altrex.com.au with the dimensions of your cover, name and delivery address.
- Do you provide spacers with the number plate protectors? Spacers are provided with the Swing Clip covers. If you still need assistance, please contact us at sales@altrex.com.au
- What does my number plate protector warranty include? The Altrex guarantee covers your number plate protector’s acrylic against the effects of the sun including cracking, crazing or yellowing. The guarantee does not cover damage or loss from incorrect fitting, accident or misuse. Please refer to the individual product packaging for details regarding the Warranty Period as the guarantee varies for different lines.
- How do I install the Altrex anti-theft rego plate lock security screws?
1- Remove the existing screws.
2- Match the thread of the security screw with the removed screw.
3- Place spacer behind number plate hole
4- Insert security screw through the number plate and spacer
5- Use hand-held screwdriver to fully tighten and secure.
- After installing the Anti Theft Rego Plate Lock Security Screws, how do I buy a removal tool should I need to remove them? The removal tool is not available for purchase. It is held by our authorised stockists only. If you need to remove them, please contact us for assistance at sales@altrex.com.au
- How do you install the Altrex Window Tint? Follow this instructional video.
- How do you install the Altrex Skinz Invisible Protection Film? Follow this instructional video.
- Do you sell backing plates? Yes! We have a universal backing plate which can be trimmed to size if required. You can order it here Backing Plate Universal.
- How do I install the backing plate?
1- If required, trim the backing plate to the required size.
2- Remove the screws from your number plate. Keep them aside to refit the plate later.
3- Clean the number plate with a clean cloth, glass or acrylic cleaner.
4- Clean the vehicle surface that was covered by the plate.
5- Align the backing plate’s screw holes with the vehicle’s existing screw holes.
6- Position the number plate in front of the backing plate so that the original screws fit into the vehicle’s existing screw holes.
7- Once aligned, screw the two plates into the vehicle’s original screw holes to secure the plates to the vehicle. If the number plate screw holes don’t align with the vehicle’s bumper holes, then screw the backing plate to the bumper and then screw the number plate onto the back plate.
Note: Use the screws provided or re-use those already holding the plates onto your vehicle.
